[j-nsp] Juniper MX240 to Alcatel SAS-M epipe
Eduardo.Barrios at LCRA.ORG
Wed Aug 7 10:22:26 EDT 2013
It's a mixture of Alcatel and Juniper, we always use the lowest MTU 2102 (this is the MAX MTU on a 7705). Our M10s do 9192. Even though we might have a primary path that was discovered @ 9192 we still have to take into account detours and secondary paths that might be 2102.
From: Mark Tinka [mailto:mark.tinka at seacom.mu]
Sent: Wednesday, August 07, 2013 9:14 AM
To: juniper-nsp at puck.nether.net
Cc: Eduardo Barrios; Tomasz Mikołajek
Subject: Re: [j-nsp] Juniper MX240 to Alcatel SAS-M epipe
On Wednesday, August 07, 2013 04:01:46 PM Eduardo Barrios
> We have a couple of VPLS instances b/t a Juniper M10i and
> an Alcatel7705. The difference seems to be 14.
> Unfortunately Alcatel does not have an
> "ignore-mtu-mismatch" switch.
Not sure what ALU do, but if it's anything like IOS, it'll
be a 14-byte difference from Junos.
If you own the backhaul (or have some measure of control
over it), just run 9,000 bytes or more and be done with it.
More information about the juniper-nsp