[j-nsp] FW: 1000Base-T SFP shows Link Up without cable inserted

[Thong Hawk Yen]

Hi Mathias,

We have experience something quite similar with out MX480 BRAS as well. Can remember what version of Junos we were running but it was the "X" track  specifically for the subscriber management features instead of the "R" track. It was a 3rd party copper SFP as well.

Regards
thong


> Date: Sun, 31 Mar 2013 21:55:36 +0200
> From: mathias at nilings.se
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] 1000Base-T SFP shows Link Up without cable inserted
>
> I've just upgraded two of my MX5-T boxes to 11.4R7.5 and after that my
> 3rd party 1000Base-T SFP (Transmode originals based on Finisar) started
> to show Link Up as soon as the SFP is inserted (no cable inserted).
>
> On 11.2R5.4 it worked as it should. 11.4R1.14 that the boxes came with
> was also broken.
>
> Bug or feature? Has anyone used any Juniper original 1000Base-T SFPs on
> the MX-5/10/40/80-T platform with JunOS 11.4?
>
> masun at solir1> show version
> Hostname: solir1
> Model: mx5-t
> JUNOS Base OS boot [11.4R7.5]
> JUNOS Base OS Software Suite [11.4R7.5]
> JUNOS Kernel Software Suite [11.4R7.5]
> JUNOS Crypto Software Suite [11.4R7.5]
> JUNOS Packet Forwarding Engine Support (MX80) [11.4R7.5]
> JUNOS Online Documentation [11.4R7.5]
> JUNOS Routing Software Suite [11.4R7.5]
>
> masun at solir1> show chassis pic fpc-slot 1 pic-slot 1
> FPC slot 1, PIC slot 1 information:
> Type 10x 1GE(LAN) SFP
> State Online
> PIC version 2.26
> Uptime 2 days, 23 hours, 7 minutes, 20 seconds
>
> PIC port information:
> Fiber Xcvr vendor
> Port Cable type type Xcvr vendor part number Wavelength
> 0 GIGE 1000T n/a FINISAR CORP. FCLF8521P2BTL-TR n/a
>
> masun at solir1> show interfaces ge-1/1/0
> Physical interface: ge-1/1/0, Enabled, Physical link is Up
> Interface index: 158, SNMP ifIndex: 526
> Description: Link sthir2 for Logical Systems (VPLS Lab)
> Link-level type: Ethernet, MTU: 2000, Speed: 1000mbps, BPDU Error: None, MAC-REWRITE Error: None,
> Loopback: Disabled, Source filtering: Disabled, Flow control: Enabled, Auto-negotiation: Enabled,
> Remote fault: Online
> Device flags : Present Running
> Interface flags: SNMP-Traps Internal: 0x0
> Link flags : None
> CoS queues : 8 supported, 8 maximum usable queues
> Current address: 08:81:f4:81:26:68, Hardware address: 08:81:f4:81:26:68
> Last flapped : 2013-03-31 15:11:42 EDT (00:04:46 ago)
> Input rate : 0 bps (0 pps)
> Output rate : 0 bps (0 pps)
> Active alarms : None
> Active defects : None
> Interface transmit statistics: Disabled
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp

________________________________

CONFIDENTIALITY
-------------------------
The contents of and any attachments to this email are private and confidential. If you are not the intended recipient or addressee indicated in this message, please notify the sender of the error and destroy the email and any attachments. Please do not reproduce the contents of the email or its attachments as such reproduction is a breach of confidentiality and for which legal action including injunctive relief may be sought against you. If it is your company policy that official communications are not by email, please advise immediately. Any opinions, conclusions and other information in this message that do not relate to the official business of TIME dotCom shall be understood as neither given nor endorsed by TIME dotCom, nor shall TIME dotCom shall be liable (directly or vicariously) for such opinions, statements or communications.