[j-nsp] Mixed Cisco/Juniper MPLS network

[Mark Tinka]

On Friday, August 16, 2013 12:29:00 AM Adam Vitkovsky wrote:

> Well as Chinese say, be careful what you wish for :)
> There actually is such a command (sort of) it's
> "advertise passive only" under router isis.
> I enter RID interfaces into ISIS with cmd "passive
> interface loopbck 0". And that's all I need to be
> advertised by an IGP underpinning an MPLS backbone.
> All the rest is in the VRFs.

That would be a bit of a hammer :-).

Mark.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <https://puck.nether.net/pipermail/juniper-nsp/attachments/20130816/2ce953f9/attachment.sig>