[j-nsp] EX-4200 two members virtual chassis problem

[Sachin Rai]

can you provide the output of the following command:
show virtual-chassis status detail
show virtual-chassis active-topology


> Date: Fri, 23 Aug 2013 11:40:08 -0700
> From: zuraiqi_laith at yahoo.com
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] EX-4200 two members virtual chassis problem
> 
> Dears,
>  
> I
> have two ex-4200-24 f running 11.4r8.5 software, connected through two VCP
> ports, it was connected to mx router by trunk port and the uplink connected to
> member 0.
> The
> customers connected to member 0(master) working fine , but when I add a
> customer to member 1 ,I cannot access to the MX-Router .I toggled the mastership
> between the two members all my services went down .
>  
> Any
> suggestions
> 
> Laith Zuraiqi
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp