[j-nsp] policer for ipv4 and ipv6

[Nikita Shirokov]

Define policer as a logical interface policer.  So it will be the same instance of the policer on the all families at the same logical unit—
WBR, Nikita V. Shirokov

On Thu, Dec 19, 2013 at 12:15 PM, Dennis Bernic <dennis.frtlc at gmail.com>
wrote:

> Hello,
> seeking to apply a policer for both ipv4 and ipv6.
> family any filter doesn't allow to math under destination address condition.
> any clue how to perform this configuration?
> running mx80 juniper platform.
> BR,
> -- 
> Dennis Bernic
> CCNP, Ip Network Engeneer
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp