[j-nsp] Need to VLAN Translate/Swap on a Trunk Interface (EX4200)
Harold 'Buz' Dale
buz.dale at usg.edu
Mon Dec 23 09:34:14 EST 2013
The first hack that jumps out at me is a physical wire and two access
ports. It¹s ugly but you should be able to do it. Of course, you¹d have
to have a separate setup for each vlan. Are the conflicts in the middle
or on the end? Could you double tag them and then strip the outer tags at
the customer handoff?
On 12/23/13, 2:49 AM, "Skeeve Stevens"
<skeeve+junipernsp at eintellegonetworks.com> wrote:
>I need to be able to re-write/translate/swap a VLAN on one trunk port out
>another trunk port.
>Gives the process, but says ""swap" configuration can only be enabled on
>dot1q-tunneling access ports"
>The scenario is that we are taking VLANs from a wholesale provider, who
>assigning the VLANs... we are then sending them downstream to a customer,
>but need to re-number due to VLAN conflicts.
>Junos: 12.3 - but willing to try anything
>Thoughts anyone? Other suggestions of ways to do it welcome.
>*Skeeve Stevens - *eintellego Networks Pty Ltd
>skeeve at eintellegonetworks.com ; www.eintellegonetworks.com
>Phone: 1300 239 038; Cell +61 (0)414 753 383 ; skype://skeeve
>facebook.com/eintellegonetworks ; <http://twitter.com/networkceoau>
>twitter.com/theispguy ; blog: www.theispguy.com
>The Experts Who The Experts Call
>Juniper - Cisco - Cloud - Consulting
>juniper-nsp mailing list juniper-nsp at puck.nether.net
More information about the juniper-nsp