[j-nsp] JUNOS-secondary Path

[OBrien, Will]

Config or it didn't happen

Will O'Brien

On Feb 1, 2013, at 5:06 PM, "Ahmed Taha" <ahmedtaha4 at hotmail.com> wrote:

> 
>  Hi all,I have a query , as I'm trying to establish LSP secondary tunnel , but that secondary one becomes up for seconds , and then became down.Here is the Output when using , show mpls lsp extensive:
> Secondary two              State: Dn
>    Priorities: 7 0
>    SmartOptimizeTimer: 180
>        No computed ERO.
>   119 Feb  1 02:28:03.405 Clear Call
>   118 Feb  1 02:28:01.818 Record Route:  192.168.14.2 172.16.16.2 172.17.17.2 192.168.17.2 192.168.18.2
>   117 Feb  1 02:28:01.818 Up
> Last message I get is " Clear call" , I tried to check traceoptions for that , I could see these wordsno constraints to check
> Feb  1 02:28:01.786712  Link overlap with primary path, adding cost 8000000and Long O/P , so could anyone advise me.                         
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp