[j-nsp] Command to see multicast packet size

[Antonio Sanchez-Monge]

You probably need a filter like this:

configure
set firewall family inet filter myFilter term myFlow from source-address 1.2.3.4/32
set firewall family inet filter myFilter term myFlow from source-address 224.1.2.3/32
set firewall family inet filter myFilter term myFlow then count myFlowCount
set firewall family inet filter myFilter term myFlow then accept
set firewall family inet filter myFilter term Rest then accept
set forwarding-options family inet filter input myFilter
commit and-quit

show firewall filter myFilter


From: Riccardo S [mailto:dim0sal at hotmail.com]
Sent: Friday, February 08, 2013 3:42 PM
To: Antonio Sanchez-Monge; juniper-nsp at puck.nether.net
Subject: RE: [j-nsp] Command to see multicast packet size

Hi
I saw it but no info is found related to the average pkt size...

> show multicast route extensive group 224.1.2.3
Group: 224.1.2.3
    Source: 1.2.3.4/32
    Upstream interface: ae0.811
    Downstream interface list:
        gr-1/1/0.1245
    Session description: Unknown
    Statistics: 0 kBps, 1 pps, 35231 packets
    Next-hop ID: 1048577
    Upstream protocol: PIM
    Route state: Active
    Forwarding state: Forwarding
    Cache lifetime/timeout: 360 seconds
    Wrong incoming interface notifications: 0
    Uptime: 09:40:25

Tks

> From: amonge at juniper.net<mailto:amonge at juniper.net>
> To: dim0sal at hotmail.com<mailto:dim0sal at hotmail.com>; juniper-nsp at puck.nether.net<mailto:juniper-nsp at puck.nether.net>
> Subject: RE: [j-nsp] Command to see multicast packet size
> Date: Fri, 8 Feb 2013 14:35:36 +0000
>
> Hi,
>
> show multicast route extensive
>
> Ato
> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net<mailto:juniper-nsp-bounces at puck.nether.net> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Riccardo S
> Sent: Friday, February 08, 2013 3:33 PM
> To: juniper-nsp at puck.nether.net<mailto:juniper-nsp at puck.nether.net>
> Subject: [j-nsp] Command to see multicast packet size
>
>
> Hi
> is there in Junos the equivalent command as in IOS:
>
> show ip mroute x.x.x.x count
>
> where you can see the packet size of the flow ?
>
>
> Example
>
> #sh ip mroute 224.1.2.3 count
> IP Multicast Statistics
> 1004 routes using 445962 bytes of memory
> 152 groups, 5.60 average sources per group Forwarding Counts: Pkt Count/Pkts per second/Avg Pkt Size/Kilobits per second Other counts: Total/RPF failed/Other drops(OIF-null, rate-limit etc)
>
> Group: 224.1.2.3, Source count: 1, Packets forwarded: 34050, Packets received: 34050
> RP-tree: Forwarding: 2/0/36/0, Other: 2/0/0
> Source: 1.2.3.4/32, Forwarding: 34048/1/53/0, Other: 34048/0/0
>
> Thanks
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net<mailto:juniper-nsp at puck.nether.net> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>