[j-nsp] Redistribution question.

[Per Granath]

Yes, in Junos you do not "redistribute from ospf", you "export from inet.0" and one of your terms in the policy for that export is that the route should be from "protocol ospf". As you have noticed, your connected networks are from 'direct' (pseudo) protocol and not from ospf.


-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Ali Sumsam
Sent: Monday, February 11, 2013 11:25 AM
To: <juniper-nsp at puck.nether.net>
Subject: [j-nsp] Redistribution question.

Hi All,

My question is to clarify something that i have learned after a few hours of troubleshooting. I Want a confirmation before i can lock down my concept.

Lets take redistribution in Cisco IOS first. If I am redistributing, lets say from OSPF to ISIS, the routes learned via OSPF plus the interfaces advertised in OSPF will be redistributed into ISIS.

I was doing the redistribution from OSPF to ISIS in Junos. Routes learned vis OSPF are sent into ISIS, but the interfaces advertised in the OSPF (of-course on the redistributing router)  are not advertised into ISIS. Is this because my routing tables knows those subnets under "direct" and not in the OSPF table?

Regards,
*Ali Sumsam CCIE*
*Network Engineer - Level 3*
eintellego Pty Ltd
ali at eintellego.net ; www.eintellego.net

Phone: 1300 753 383 ; Fax: (+612) 8572 9954

Cell +61 (0)410 603 531

facebook.com/eintellego
PO Box 7726, Baulkham Hills, NSW 1755 Australia

The Experts Who The Experts Call
Juniper - Cisco - Brocade - IBM
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp