[j-nsp] MX80 BGP performance after reboot

[Sebastian Wiesinger]

* Sebastian Wiesinger <juniper-nsp at ml.karotte.org> [2013-02-15 00:55]:
> I just tested this after talking to JTAC. Just for reference:
> 
> I had ~70k routes from 40 peers that I deactivated. I then turned them
> up again and measured with inline-jflow disabled and enabled.
> 
> With inline-jflow ON: around 10-12 minutes until KRT settles
> With inline-jflow OFF: around 2 minutes until KRT settles
> 
> To build a full table (after reboot) it's even longer of course.

So... ATAC says this is expected behavior for this platform.  Nothing
wrong with the router.

He even sent me lab tests that he did which proved that it takes them
the same time in the lab.

I now sent him the NANOG slides and PR mentioned here. Waiting for an
answer...

Regards

Sebastian

-- 
GPG Key: 0x93A0B9CE (F4F6 B1A3 866B 26E9 450A  9D82 58A2 D94A 93A0 B9CE)
'Are you Death?' ... IT'S THE SCYTHE, ISN'T IT? PEOPLE ALWAYS NOTICE THE SCYTHE.
            -- Terry Pratchett, The Fifth Elephant