[j-nsp] MX80 BGP performance after reboot

[Sebastian Wiesinger]

* Saku Ytti <saku at ytti.fi> [2013-02-19 13:09]:
> On (2013-02-19 10:54 +0100), Sebastian Wiesinger wrote:
>  
> > Okay, so ATAC says that the NANOG PR has nothing to do with this case.
> > This is a hardware limitation on MX and cannot be improved according
> > to them.
> 
> I think they are missing the point completely. There is no excuse to
> blackhole, poorly performing code does not justify it, poorly performing
> hardware does not justify it.
> 
> Do NOT send routes out, if you are not sure that you've installed them, by
> the time neighbour gets the update.

Yes, I agree. But that's a design "decision" so ATAC is not
interested. I'll try to get this to Juniper trough my SE but I don't
know if that'll do any good.

Regards

Sebastian

-- 
GPG Key: 0x93A0B9CE (F4F6 B1A3 866B 26E9 450A  9D82 58A2 D94A 93A0 B9CE)
'Are you Death?' ... IT'S THE SCYTHE, ISN'T IT? PEOPLE ALWAYS NOTICE THE SCYTHE.
            -- Terry Pratchett, The Fifth Elephant