[j-nsp] SRX and not working VRRP

[Chuck Anderson]

On Wed, Jan 09, 2013 at 12:36:47AM +0100, Robert Hass wrote:
> Hi
> I have SRX100 running 11.4R6.5 and I cannot make VRRP working. I have
> configuration like below:
> 
> admin at srx100> show configuration interfaces fe-0/0/0
> unit 0 {
>     family inet {
>         address 10.0.0.69/29 {
>             vrrp-group 0 {
>                 virtual-address 10.0.0.70;
>                 priority 253;
>             }
>         }
>     }
> }
> 
> admin at srx100> show vrrp
> Interface     State       Group   VR state VR Mode   Timer    Type   Address
> fe-0/0/0.0    up              0   master   Active      A  0.128 lcl    10.0.0.69
>                                                                 vip    10.0.0.70
> 
> But I cannot ping 10.0.0.70 from host in this subnet (10.0.0.68) and
> also from SRX inself:
> I'm able to ping 10.0.0.69 without problem from SRX and host 10.0.0.68.
> 
> admin at srx100> ping 10.0.0.70
> PING 10.0.0.70 (10.0.0.70): 56 data bytes
> ping: sendto: No route to host
> ^C
> --- 10.0.0.70 ping statistics ---
> 1 packets transmitted, 0 packets received, 100% packet loss
> 
> 
> What I did wrong ? I also added protocol VRRP to security, but didn't helped :(

set vrrp-group 0 accept-data