[j-nsp] EX Switch Question

[Per Granath]

The general idea is to do:

Policing (firewall filter) on ingress
Shaping (CoS) on egress

http://www.juniper.net/us/en/local/pdf/implementation-guides/8010073-en.pdf

Shaping is typically per port, and I am not sure if you can do that per VLAN.
But the feature guide say there is CoS support on RVIs...

https://www.juniper.net/techpubs/en_US/release-independent/junos/topics/concept/ex-series-software-features-overview.html#cos-features-by-platform-table

In that case, the EX4200 virtual chassis seems good.

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Paul Stewart
Sent: Thursday, January 10, 2013 3:04 PM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] EX Switch Question


Per port ingress and egress bandwidth control (rate limiting with burst)

Per VLAN ingress and egress bandwidth control (rate limiting on a per VLAN basis with burst)