[j-nsp] EX Switch Question

[Paul Stewart]

Thanks....

We have a 6500 installation running hybrid IOS/CatOS and the CatOS component
does it quite well.  On another installation with MSFC2 supervisors and
native IOS we also have it working... both installations are very ancient
10+  years

:)

Paul


-----Original Message-----
From: Benny Amorsen [mailto:benny+usenet at amorsen.dk] 
Sent: January-10-13 9:41 AM
To: Paul Stewart
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] EX Switch Question

"Paul Stewart" <paul at paulstewart.org> writes:

> Per VLAN ingress and egress bandwidth control (rate limiting on a per 
> VLAN basis with burst)

That sounds like hierarchial shaping. You need MX for that, and even then
you may meet challenges doing it on ingress.

I would have thought that the 6500 needed ES cards for that, but those have
only been available for about 5 years?


/Benny