[j-nsp] FXP0 down log message

[Muhammad Aamir]

shutdown the fxp0 interface and activate it again.

Regards,
Muhammad Aamir


On Tue, Jan 15, 2013 at 8:53 AM, Tima Maryin <timamaryin at mail.ru> wrote:

> Hi,
>
>
>
> On 15.01.2013 9:29, Muruganandham M wrote:
>
>> Hi,
>>
>>        I have set the configuration to ignore the fxp0 failure alarm. The
>> alarm is ignored. However, the Log messages are filled with this alarm
>> clear message every 5 second.
>>
>
>
> https://prsearch.juniper.net/**InfoCenter/index?page=**
> prcontent&id=PR749954<https://prsearch.juniper.net/InfoCenter/index?page=prcontent&id=PR749954>
>
> ______________________________**_________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/**mailman/listinfo/juniper-nsp<https://puck.nether.net/mailman/listinfo/juniper-nsp>
>