[j-nsp] Cannot auto-configure the router interface IPv6 address?

[Huan Pham]

Hi list,

Could someone please confirm if we can or can not configure the router
interface to get an IPv6 address automatically. I read more than one place
that says this is not possible, but I could not find an official link from
Juniper website to confirm it. It is disappointing, if this is the case.

Regards,

Huan


On Mon, Jan 14, 2013 at 11:00 PM, Huan Pham <drie.huanpham at gmail.com> wrote:

> Hi all,
>
> I would like to do a simple test to make sure that SLAAC configuration on
> R1 is working as expected. However, I do not want to use a real PC
> connected to it to test, but I want to use another router (R2) as client.
> Could you please let me know if it is possible, and how it is done in
> Junos. Thanks.
>
> Below is what I try to achieve if it is done in Cisco world.
>
> R2(config-if)#interface gig/0
> R2(config-if)#ipv6 address autoconfig
> R2(config-if)#
>
> Thanks in advance.
>
> Cheers,
>
>