[j-nsp] Traffic balancing over LSPs

Per Granath per.granath at gcc.com.cy
Fri Jan 18 04:29:39 EST 2013


You could use the "install" command under the LSP on the ingress PE (which is somewhat manual), or you could change from OSPF to BGP on the CMTS...

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of James Ashton
Sent: Thursday, January 17, 2013 5:07 PM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] Traffic balancing over LSPs

I have an interesting situation that has me stumped for the moment.

I have an OSPF speaking device (ARRIS CMTS) hanging off from an EX Switch. 
That switch is uplinked to an MX480 which is part of the network core. It has several paths into it from rest of the network.
>From several major traffic centers in the network I have 3 LSPs created to the MX480.
I am running "mpls traffic-engineering mpls-forwarding" throughout the network.

As the end users hanging off the CMTS are advertised onto the network via OSPF, and I cannot terminate LSPs on the CMTS, the traffic to these users is not being forwarded over the LSPs.
I have tested enabling "ospf traffic-engineering shortcuts" but that is breaking several paths in the network to legacy areas with odd configs. 

My question is basically, how can I get this traffic into these LSPs in way that is more manageable at scale than a pile of static routes.


I hope the above is clear,  I am low on Caffeine at the moment.

Thank you in  advance for any help/ideas.

James
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp



More information about the juniper-nsp mailing list