[j-nsp] Vlan question MX

[joel jaeggli]

On 7/8/13 10:26 AM, Keith wrote:
> Have this setup in the lab on some srx's but want to get some info
> on this.
>
> We have an upstream provider that we use a config:
>
> set interfaces ge-0/1/0 vlan-tagging
> set interfaces ge-0/1/0 encapsulation flexible-ethernet-services
> set interfaces ge-0/1/0 unit 1500 vlan-id 1500
> set interfaces ge-0/1/0 unit 1500 family inet address x.x.x.x/30
>
>
> We are turning up a second connection to them that will be terminated 
> on a 10G
> link and want us to use the same thing, vlan 1500, just a different IP 
> address.
>
> Will this cause a problem by having the same vlan id on both links to the
> same provider? (I am guessing we are being terminated on different 
> routers
> on their side).
>
nope it's a layer-3 interface.

honey badger don't care.
> My lab router didn't complain so I'm guessing its probably ok.
>
> Thanks,
> Keith
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>