[j-nsp] Vlan question MX

Keith kwoody at citywest.ca
Mon Jul 8 18:34:01 EDT 2013


On 7/8/2013 10:26 AM, Keith wrote:
> Have this setup in the lab on some srx's but want to get some info
> on this.
>
> We have an upstream provider that we use a config:
>
> set interfaces ge-0/1/0 vlan-tagging
> set interfaces ge-0/1/0 encapsulation flexible-ethernet-services
> set interfaces ge-0/1/0 unit 1500 vlan-id 1500
> set interfaces ge-0/1/0 unit 1500 family inet address x.x.x.x/30
>
>
> We are turning up a second connection to them that will be terminated on a 10G
> link and want us to use the same thing, vlan 1500, just a different IP address.
>
> Will this cause a problem by having the same vlan id on both links to the
> same provider? (I am guessing we are being terminated on different routers
> on their side).

Thanks for replies. I knew it was ok, but just wanted to be that extra bit sure.




More information about the juniper-nsp mailing list