[j-nsp] EX4550 version

[Ben Dale]

I believe 12.3R2 still has the bug where the syslog fills up with erroneous messages about one or both of the power supplies being removed (12.3R1 complains about the fan tray AND the power supplies).  This is finally put to bed in 12.3R3

Cheers,

Ben

On 24/07/2013, at 7:56 PM, Pierre-Yves Maunier <j-nsp at maunier.org> wrote:

> I'll be deploying a couple of EX4550 doing mainly L3/MPLS stuff (ospf,
> bgp, l3vpn, l2circuit) and I'm going to roll out 12.3R3.4.
> 
> Generally I prefer using at least an R3 release and as Juniper
> promised me that 12.3 would be 'the next 11.4' then I'm going for this
> one.
> 
> 2013/7/24 Luca Salvatore <Luca at ninefold.com>:
>> Hi All,
>> 
>> Just got a couple of new EX4550 switches... current recommended version is 12.2r2.5
>> But I just saw tha the 12.2 train is up release 5.3.
>> 
>> Just wondering what the rest of you guys are running  and if you have any horror stories.
>> I'm not doing VC with these guys, they are going to be a pretty simple layer 2 aggregation type switch.
>> 
>> Thanks.
>> 
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>