[j-nsp] L2VPN Termination

[Paul Stewart]

Thanks - another helpful person from the list sent me some config snippets
offline that should set me in the right direction (using LT interfaces)

Much appreciated,

Paul


On 2013-07-25 12:08 PM, "Mark Tinka" <mark.tinka at seacom.mu> wrote:

>On Thursday, July 25, 2013 06:54:57 PM Paul Stewart wrote:
>
>> Is there a way using an L2VPN to terminate the path on a
>> loopback or other virtual interface?  At the customer
>> premise, there is a physical port which could be one end
>> of the L2VPN but at a nearby core router I would like to
>> "virtually" terminate the other end therefore creating a
>> point to point /30 for BGP to speak over and provide a
>> full table?
>
>Cisco call this a Routed Pseudowire:
>
>http://www.cisco.com/en/US/docs/ios-
>xml/ios/mp_l2_vpns/configuration/xe-3s/mp-rt-pw-rt-vpls.html
>
>My memory fails me, but I recall someone mentioning
>something like this on this list in past, using lt-
>interfaces. Can't recall; any time I've wanted to do it,
>it's been on a Cisco.
>
>Maybe someone else can chime in.
>
>Mark.