[j-nsp] OSPF between Juniper and systems

Fri Jul 26 10:33:21 EDT 2013

You have to match them appropriately.  Take a look at my nexus-srx example.

On Jul 26, 2013, at 9:30 AM, Mark Tinka wrote:

> On Friday, July 26, 2013 03:21:32 PM R S wrote:
> 
>> In a
>> broadcast interface (GE) I’ve to run OSPF between my MX
>> and some systems running OSPF.
>> 
>> 
>> What about
>> L2 and L3 MTU ?
>> 
>> 
>> Can I fix
>> greater MTU on MX and the OSPF adj will come up or not ?
>> Pls advise
> 
> Layer 3 MTU must match on link for OSPF adjacencies to come 
> up.
> 
> I know you can ignore MTU mismatch in Cisco (did that when 
> deploying Quagga), but haven't tried it for Juniper.
> 
> Mark.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp