[j-nsp] M120 - Netflow/Jflow Export

[Jake Jake]

Does RE based sampling have an adverse effect on the CPU/Memory. Plus the
sample config in the link provided, the destination server details are
configured under forwarding-options > sampling > output. But in version
11.1 the command options are not the same.The only option I see is as
follows

set forwarding-options sampling family inet output flow-server 1.1.1.1 port
x
set forwarding-options sampling family inet output flow-server 1.1.1.1
version 5
set forwarding-options sampling family inet output flow-server
1.1.1.1 autonomous-system-type orgin
set forwarding-options sampling family inet output flow-server 1.1.1.1
source-address x.x.x.x

set forwarding-options sampling input max-packets-per-second
set forwarding-options sampling input  run-length 10
set forwarding-options sampling input rate 10

Will this work as well?


On Thu, Jun 6, 2013 at 3:42 AM, Chris Kawchuk <juniperdude at gmail.com> wrote:

> RE based Sampling:
>
> http://juniper.cluepon.net/index.php/Cflowd_configuration
>
> - CK.
>
> On 06/06/2013, at 9:01 AM, Jake Jake <2012jake at gmail.com> wrote:
>
> > Hi All,
> >
> > Is it possible to export netflow/jflow from a M120 router(Junos 11.1) to
> an
> > external netflow analyser on the network without a Multiservice PIC
> > installed?  It would be great with a sample configuration that need to be
> > applied on the router.
> >
> > Thanks.
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>