[j-nsp] BOOTP helper on MX vrf

Peter Krupl paak at siminn.dk
Thu Jun 13 07:24:21 EDT 2013


Hi,

I have the following configuration working on an MX240 running 12.2R3.5.
--------------------------------------------CUT--------------------------------------------
set routing-instances 1023 forwarding-options dhcp-relay server-group SRV 10.1.1.33
set routing-instances 1023 forwarding-options dhcp-relay active-server-group SRV
set routing-instances 1023 forwarding-options dhcp-relay group all active-server-group SRV
set routing-instances 1023 forwarding-options dhcp-relay group all interface ge-2/0/2.85
set routing-instances 1023 forwarding-options dhcp-relay group all interface ge-2/1/9.806
--------------------------------------------CUT--------------------------------------------
root at PE1-SVV> show dhcp relay binding routing-instance 1023                                 

IP address        Session Id  Hardware address   Expires     State      Interface
10.1.6.106        9           00:1c:25:98:30:ca  685920      BOUND      ge-2/1/9.806        
10.1.6.112        78          00:1c:25:9a:0b:f7  669024      BOUND      ge-2/1/9.806        
10.1.6.105        107         00:1c:25:9a:3e:c0  673974      BOUND      ge-2/1/9.806        
10.1.6.103        35          00:24:7e:00:a9:da  671427      BOUND      ge-2/1/9.806        
10.1.6.101        90          00:24:7e:de:d4:e4  665187      BOUND      ge-2/1/9.806
--------------------------------------------CUT--------------------------------------------

Until now it has been running perfectly.



Med venlig hilsen / Kind regards
Peter Krüpl
Network Specialist
Tel: +45 88805242
Siminn Danmark A/S


-----Original Message-----
From: juniper-nsp [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Sebastian Wiesinger
Sent: 13. juni 2013 13:03
To: Juniper NSP
Subject: [j-nsp] BOOTP helper on MX vrf

Hello,

as I'm hearing conflicting information regarding bootp helper on MX routers in a vrf routing-instance, has anyone a working configuration?

What I need:

Forward DHCP broadcast requests from one vrf interface to a central DHCP server in the same VRF (classical bootp helper functionality). I don't want bootp helper on *every* interface, just a few.

So any information regarding this is appreciated.

Regards

Sebastian

--
GPG Key: 0x93A0B9CE (F4F6 B1A3 866B 26E9 450A  9D82 58A2 D94A 93A0 B9CE) 'Are you Death?' ... IT'S THE SCYTHE, ISN'T IT? PEOPLE ALWAYS NOTICE THE SCYTHE.
            -- Terry Pratchett, The Fifth Elephant _______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp



More information about the juniper-nsp mailing list