[j-nsp] Route-aggregation

Cristian Frizziero cristian.frizziero at iquall.net
Wed Jun 19 05:16:32 EDT 2013


Hi Shanawaz,
Not sure to have understood: are you experimenting a limitation in the 
export of an aggregate route due to the length of the mask?
This should not happen.
Could you clarify, with a show route ?
Thanks
Cristian




On 06/19/2013 08:35 AM, Shanawaz wrote:
> Using route-aggregation like the below..
>
> set routing-options aggregate route 172.16.0.0/26 community 65535:10000
> set routing-options aggregate route 172.16.0.0/26 discard
>
> to advertise routes to ebgp peers, this works well if the routes in the
> table are a /27 or below. However this does not work if the route in my
> table is a /26
>
> Is there a way to advertise the /26 out using the aggregate route option?
> Kind of tell the router advertise everything /26 and more specific?
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp


-- 
--------------------------
Cristian Frizziero



More information about the juniper-nsp mailing list