[j-nsp] MX Series MIBS

[joel jaeggli]

On 3/4/13 8:15 AM, Josh Hoppes wrote:
> A full set of MIBs are available here:
> http://www.juniper.net/techpubs/en_US/junos11.4/topics/concept/juniper-specific-mibs-junos-nm.html
>
> This MIB is is probably the one you want:
> http://www.juniper.net/techpubs/en_US/junos11.4/topics/reference/mibs/mib-jnx-chassis.txt
>
> They are versioned, I just linked to 11.4 as we are using that release
> but I would make sure to use the one applicable for your deployment.
It's also worth noting that the m-series cacti templates do monitor the 
values you're looking for in the mx in general.
> On Mon, Mar 4, 2013 at 9:09 AM, Brian Johnson <bjohnson at drtel.com> wrote:
>> I am having a difficult time determining what MIBs to monitor on my new Juniper MX routers. I come from a Cisco shop and know how to monitor CPU, memory and (of course) interface stats. I'm having no issues with monitoring interfaces, but cannot determine what MIBs to monitor for CPU and memory usage.
>>
>> I am using Cacti and could not find a good template for MX routers out there. I'd be willing to build and share if anyone can tell me what important system mibs to graph and supply the mibs for the MX5 through MX80 units.
>>
>> Thanks
>>
>> - Brian
>>
>>
>>
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>