[j-nsp] 3750 and 4200

[snort bsd]

thanks.

i don't think lacp is required for bundle links to work. i had done bundle links between cisco to cisco, juniper to juniper without lacp.

i tried to avoid confusion of lacp between two switches before i know for sure two sides of links are working together.

_dave


________________________________
 From: Jonathan Lassoff <jof at thejof.com>
To: Eric Krichbaum <eric at telic.us> 
Cc: snort bsd <snortbsd at yahoo.com.au>; juniper-nsp <juniper-nsp at puck.nether.net> 
Sent: Wednesday, 13 March 2013 10:15 PM
Subject: Re: [j-nsp] 3750 and 4200
 
On Wed, Mar 13, 2013 at 6:36 PM, Eric Krichbaum <eric at telic.us> wrote:
> More likely, it's the forced "on" mode which disables LACP.  Try it with
> mode active.

Will JunOS show the ae as down, then?

[channel-group N mode on] with IOS just enables portchanneling unconditionally.
Wouldn't that, in conjunction with a JunOS without an "lacp" stanza
under the ifd / interface stanza (lacp passive) work just fine? I've
mostly only been doing JunOS-JunOS LACP lately, though I've done it
quite a bit with Cisco-Cisco in the past.

LACP is worth running on your links if it works, IMO.

Maybe try setting active on the JunOS and Cisco sides?

!
interface Fa1/0/9
channel-group 10 mode active
!

set interface ae1 aggregated-ether-options lacp active