[j-nsp] SRX - Static Routing Out Same Interface

[OBrien, Will]

Do you have a policy allowing traffic from that zone to that zone?

On Nov 3, 2010, at 7:33 AM, Bruce Buchanan wrote:

Hi List –

Can anyone give any suggestion/guidance on the following.

I’m trying to do a static route *out* the same interface that the traffic came *in* on.  This is on an SRX-240

Here are the details:
“Private”: 192.168.20.0/24
“Public”: 216.168.x.x/32
Static route: 172.30.200.0/24 to <gateway – 192.168.20.224> to 192.168.20.121

192.168.20.121 is the IP on a VPN appliance.

Traffic from a client computer never gets routed to the VPN appliance.  This works on a Cisco 2800 without a problem, but I can’t get it working on the SRX.

Thanks,
Bruce

Bruce Buchanan
Senior Network Technician
Nexicom
5 King St. E., Millbrook, ON, LOA 1GO
Phone: 705-932-4147
FAX: 705-932-3027
Cell: 705-750-7705
Web: http://www.nexicom.net<http://www.nexicom.net/>
Nexicom – Connected. Naturally.
<image001.png><http://messaging.nexicom.net/demo/callme.html?Token=%2BMG4FqUv2NeHeDa1hskfYtfJuno3cQZPLYABdYJ%2FSzqBopBqHiON5tp2gJxEFzvYJEVgFhguIyM94VT%2F5gSYKQPnNXfHtvtV4SL6WuBmtmrG9lu3W5DQJcNnjVetEwcMmynAZcsFspCj4zNyGZPVNQ9cD3MGYjzhJDuAztmmlY30X%2BInJFzGAIlxND9W0RghG63yJ4vYC%2BrYtAv33AYFzjqErh1nzDUutVR6cmGs%2BS9ymGDFRZ80IXTOm%2FRWr5AdjBr4L8EUO6tadfT3JSWBZdN1U9hDimBYYZgNaSPOUFLZBq5uwsyU%2Bf67gYm0NPIV6kggg%2B59ypWRWTDccFUF6ph3msB0k83cnY3FAWynyM5w2BYZZQmFIXVBCTMjkE01ulNAUnyyZh%2BMLmKXuci9RmrF1kq7tvNcCOtEFvYckpBHUjyH6%2FtX9wjXqATwcmgNU7ZVPdG5JvhdwS4m5tlusg%3D%3D>

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net<mailto:juniper-nsp at puck.nether.net>
https://puck.nether.net/mailman/listinfo/juniper-nsp