[j-nsp] display bug? ex4500 junos 12.2R2.4

[ryanL]

that seems to work.

ry at fs-cs2# run show interfaces ge-* terse | except "\."
Interface               Admin Link Proto    Local                 Remote
ge-0/0/0                up    up
ge-0/0/32               up    up
ge-0/0/33               up    up
ge-0/0/34               up    up
ge-0/0/35               up    up

On Tue, May 7, 2013 at 2:51 PM, Phil Shafer <phil at juniper.net> wrote:
> What does:
>
>   show interfaces ge-* terse | except "\."
>
> say?
>
> Thanks,
>  Phil
>
>
>
> ryanL writes:
>>this seems to work fine on my 4200's running different code.
>>
>>{master:0}
>>ry at fs-cs2> show interfaces ge-0/0/[32-34]
>>
>>{master:0}
>>ry at fs-cs2> show interfaces ge-0/0/[3234]
>>
>>{master:0}
>>ry at fs-cs2> show interfaces ge-0/0/[323]
>>
>>{master:0}
>>ry at fs-cs2>blargh
>>_______________________________________________
>>juniper-nsp mailing list juniper-nsp at puck.nether.net
>>https://puck.nether.net/mailman/listinfo/juniper-nsp