[j-nsp] 100% CPU HIT on EX4200

Graham Brown juniper-nsp at grahambrown.info
Thu Nov 7 19:57:15 EST 2013

Hi Sam,

'show chassis routing-engine' and 'show system processes extensive' are two
commands to start with, when investigating this issue.

The second command will show you what process is consuming resources etc.


On 8 November 2013 13:51, Samol <molasian at gmail.com> wrote:

> Hi All,
> CPU on EX4200 run up to 100% for a period of time and I have not yet found
> what caused this. Based on your experiences, what are the things that can
> cause this and what are the commands to check this ?
> Thanks,
> Sam
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp

Graham Brown
Twitter - @mountainrescuer <https://twitter.com/#!/mountainrescuer>
LinkedIn <http://www.linkedin.com/in/grahamcbrown>

More information about the juniper-nsp mailing list