[j-nsp] AFL license for EX8200 VirtualChassis

Giuliano Medalha giuliano at wztech.com.br
Thu Nov 7 20:03:09 EST 2013


We did a bad experience buying only  EX-XRE200-AFL.

After the installation and after a commit ... the system continues to
ask the EX8208 licenses showing warning messages at console.

We bought the licenses and we need to install it by hand using shell ...

The JUNOS version was 12.3R3.

We recommend that you buy to feel free from log messages every commit.

But remember that you will need to create the correct files by hand
and install it using "vi" by shell only.

If you need more information I can help.


Giuliano Cardozo Medalha
Systems Engineer
+55 (17) 3011-3811
+55 (17) 8112-5394
giuliano at wztech.com.br

WZTECH is registered trademark of WZTECH NETWORKS.
Copyright © 2013 WZTECH NETWORKS. All Rights Reserved.

The information transmitted in this email message and any attachments
are solely for the intended recipient and may contain confidential or
privileged information. If you are not the intended recipient, any
review, transmission,  dissemination or other use of this information
is prohibited. If you have received this communication in error,
please notify the sender immediately and delete the material from any
computer, including any copies.

On Thu, Nov 7, 2013 at 7:08 AM, Robert Hass <robhass at gmail.com> wrote:
> Hi
> I'm planning to buy AFL licenses for my 2xEX8200 + 2xXRE200
> (VirtualChassis) setup.
> Do you need to buy :
> 2 x EX-XRE200-AFL
> 2 x EX8208-AFL
> or just is enough as I'm running setup with XRE/VirtualChassis
> 2 x EX-XRE200-AFL
> ?
> Rob
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp

More information about the juniper-nsp mailing list