[j-nsp] SSD disks high failure ratio ?

[Chris Cappuccio]

Mounir Mohamed [mounirmohamed at gmail.com] wrote:
> This is not a hardware issue and does not need RMA for the failed REs. They
> only need SSD secure erase sequence and a single reboot. However this has
> to be performed by Juniper engineers. I recommend to contact your SE and he
> will take care about it.
> 

The only problem here is that the SSDs are likely to develop bad blocks
and fail again in the same way. It's very hard to find high quality, SLC
SSDs anymore. MLC and TLC dominate the market and are basically junk.