[j-nsp] srx cluster - port channel - cisco switches - esx devices - 12.1x45-d15.5 some virtual machines can't be reached

[Gabriel Blanchard]

are the ciscos configured with a distributed port-channel as well? (On a
rethx from the SRX i'm assuming)

On 13-10-23 11:12 AM, pkc_mls wrote:
> Hi all,
>
> I'm running a cluster of srx 240 connected to a pair of cisco 2960
> switches with a port channel.
>
> ESXi servers are also connected to the same stack of cisco switches.
>
> vlan 1000 with ip 192.168.100.0 is used for out of band management and
> reachability.
>
> I'm using a dedicated virtual router to route the traffic from this
> vlan to other vlans.
>
> Some virtual machines can be reached but some others can't.
>
> I upgraded today to 12.1X45-D15.5, as I require vpn termination on
> loopback interface,
> and I suspect this release to have introduced weirdness into the
> configuration.
>
> Does anyone use a pair of srx devices with this release 12.1X45-D15.5
> have some issues with
> this kind of configuration ?
>
> Are there any specific configurations to be used on the port channels
> connected to the srx on the cisco stack ?
>
> Best regards.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp