[j-nsp] srx cluster - port channel - cisco switches - esx devices - 12.1x45-d15.5 some virtual machines can't be reached

[pkc_mls]

Le 24/10/2013 00:55, Ben Dale a écrit :
> Can you confirm that you have two "active" port-channels configured on 
> the Cisco side, one into each SRX? 
 From the docs I found I was assuming a single port-channel could handle 
all interfaces attached to the same reth on srx.

For example, if ge-0/0/2, ge-0/0/3, ge-5/0/2, ge-5/0/3 are attached to 
reth0, can I connect all the ports to the same etherchannel on the stack ?