[j-nsp] MX-80 as a BRAS and as a LAC

[Per Granath]

Official scaling numbers says 4,000 for L2TP on MX80.

http://www.juniper.net/techpubs/en_US/release-independent/junos/information-products/pathway-pages/subscriber-access/subscriber-management-scaling-values.xls


PPPoE uses 2 IFL only when there is a VLAN per subscriber.


-----Original Message-----
From: juniper-nsp [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Enoch Nyatoti
Sent: Friday, October 25, 2013 9:13 AM
To: Paul Stewart; Terebizh, Evgeny; juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] MX-80 as a BRAS and as a LAC

Thank you guys for your inputs. I have got it working. We have a little over 2000 subscribers for a particular area so the 4000 limit is not a concern.


 
Best regards
Enoch Nyatoti