[j-nsp] Interface group based on description

Nikita Shirokov ns.hando at gmail.com
Thu Oct 31 01:00:04 EDT 2013


The closest thing which could do what you want is commit script + apply macro. Something like this:

https://github.com/tehnerd/juniper_scripts/blob/master/commit/com_test.slax

—
Sent from Mailbox for iPhone

On Thu, Oct 31, 2013 at 2:57 AM, Brad Fleming <bdflemin at gmail.com> wrote:

> Does anyone know any tricks for creating a grouping of interfaces based on the description attached?
> For example: Any logical interface with the label “BACKBONE to far-node” goes into a group that could then be referenced in OSPF, LDP, RSVP, etc.
> An interface-range is close but doesn’t allow you to reference a tagged link; it expands it’s members only to ge-0/0/0.0 even if other units are configured within the range. Interface-sets are not allowed to be referenced in protocol configuration as near as I can tell.
> I’d really love a way to provision an interface, label it with “BACKBONE” or “CPE”, and have that label automatically configure the interface for the proper protocols. It’d really eliminate mistakes when turning up new tail circuit locations. Any suggestions or pointers would be greatly appreciated!
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp


More information about the juniper-nsp mailing list