[j-nsp] EX8208 - Virtual Chassis with AFL License

[Diogo Montagner]

Have you checked the output of show system license ?

And does the installed license ID matches with your device ID ?

On Friday, 6 September 2013, Giuliano Medalha wrote:

> The AFL License is used to activate BGP.
>
> Any feature related to AFL License ... BGP, IS-IS, MPLS  ... have the
> same problem.
>
> Looks like that JUNOS 12.3R3 (recommended release for J-TAC) does not
> recognize that AFL licenses are correctly installed in XRE200 boxes.
>
> Giuliano Cardozo Medalha
> Systems Engineer
> +55 (17) 3011-3811
> +55 (17) 8112-5394
> JUNIPER J-PARTNER ELITE
> giuliano at wztech.com.br <javascript:;>
> http://www.wztech.com.br/
>
>
>
>
> WZTECH is registered trademark of WZTECH NETWORKS.
> Copyright © 2013 WZTECH NETWORKS. All Rights Reserved.
>
> The information transmitted in this email message and any attachments
> are solely for the intended recipient and may contain confidential or
> privileged information. If you are not the intended recipient, any
> review, transmission,  dissemination or other use of this information
> is prohibited. If you have received this communication in error,
> please notify the sender immediately and delete the material from any
> computer, including any copies.
>
>
> On Thu, Sep 5, 2013 at 10:13 PM, Diogo Montagner
> <diogo.montagner at gmail.com <javascript:;>> wrote:
> > It seems your problem is related to the BGP license and not to the VC
> > license.
> >
> > Can you double confirm this ?
> >
> > If you deactivate the entire BGP configuration, does your problem get
> solved
> > ?
> >
> > Thanks
> >
> > On Friday, 6 September 2013, Giuliano Medalha wrote:
> >>
> >> People,
> >>
> >> We have a virtual chassis environment using:
> >>
> >> 2 x XRE200 (routing engines)
> >> 2 x EX8208 (linecards)
> >>
> >> We have bought AFL license for XRE200 boxes, following the JUNIPER
> >> recommendation for this environment:
> >>
> >> You do not need additional license keys for Virtual Chassis member
> >> switches that are in the linecard role or for the redundant Routing
> >> Engine (RE) modules or the redundant Switch Fabric and Routing Engine
> >> (SRE) modules in an EX8200 member switch. [1]
> >>
> >>
> >> After the installation of the 2 licenses in XRE200 boxes ... we still
> >> have problems after commit.
> >>
> >> After 27 days trying J-TAC, A-TAC, PLM, etc ... we do not have our
> >> problem solved.
> >>
> >> Does anyone on this list has some related problem with that ?
> >>
> >> Thanks a lot,
> >>
> >> Giuliano
> >>
> >>
> >> member8:
> >> configuration check succeeds
> >>
> >> member0-re0:
> >> [edit protocols]
> >>   'bgp'
> >>     warning: requires 'bgp' license
> >> member0-re1:
> >> configuration check succeeds
> >>
> >> member1-re0:
> >> [edit protocols]
> >>   'bgp'
> >>     warning: requires 'bgp' license
> >> member1:
> >> member1-re1:
> >> configuration check succeeds
> >>
> >> member9:
> >> configuration check succeeds
> >> _______________________________________________
> >> juniper-nsp mailing list juniper-nsp at puck.nether.net <javascript:;>
> >> https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
> >
> >
> > --
> > ./diogo -montagner
> > JNCIE-SP 0x41A
>


-- 
./diogo -montagner
JNCIE-SP 0x41A