[j-nsp] Jloader Update for EX4200

[Chuck Anderson]

Where do you get the "latest jloader"?  It isn't published in the same
place the regular JUNOS images are.  You have to happen to see the
TSB/KB article.  I hadn't known about any new one since the original
TSB (11.3I20110326_0802_hmerge) until I saw this email.

On Wed, Sep 18, 2013 at 12:20:26PM -0400, Paul Stewart wrote:
> Thank you ­ yes, I'm adding that into our processes here as well to try and
> be "safe" about future upgrades.
> 
> Cheers,
> 
> Paul
> 
> 
> From:  Chris Jones <ipv6freely at gmail.com>
> Date:  Wednesday, 18 September, 2013 12:18 PM
> To:  Paul Stewart <paul at paulstewart.org>
> Cc:  "juniper-nsp at puck.nether.net" <juniper-nsp at puck.nether.net>
> Subject:  Re: [j-nsp] Jloader Update for EX4200
> 
> > I'm at a point now where any time I upgrade an EX, I install the latest
> > jloader too. It takes an extra 30 seconds and doesn't hurt anything if the
> > switch already had that version running.
> > 
> > 
> > On Wed, Sep 18, 2013 at 4:53 AM, Paul Stewart <paul at paulstewart.org> wrote:
> >> Hi there...
> >> 
> >> I was looking around for something this morning on EX4200 and stumbled
> >> across a Jloader update.  Initially I presumed it was the original Jloader
> >> update but then realized that it's another update that without applying
> >> could have some pretty serious surprises in store...
> >> 
> >> My blog has a brief on it and link to the Juniper bulletin:
> >> http://paulstewart.org/2013/09/18/jloader-release-for-the-ex4200-platform-on
> >> ly/ 
> >> <http://paulstewart.org/2013/09/18/jloader-release-for-the-ex4200-platform-on
> >> ly/> 
> >> 
> >> Has anyone else come across this or been "bitten" by this yet?
> >> 
> >> Thanks,
> >> 
> >> Paul