[j-nsp] l2circuit (martini) vlan-mismatch

Saku Ytti saku at ytti.fi
Fri Sep 20 02:21:24 EDT 2013


On (2013-09-19 15:16 +0100), Alex Arseniev wrote:

Hi Alex,

> Use explicit "encapsulation-type ethernet" under [protocols
> l2circuit interface <> ] and You won't be seeing this mismatch.
> On both sides of course.

Whle this needs change in A-end also, it's very good tip, and I'll try
that out.
Just to be precise 'output-map swap' works just fine with different
SVLAN in each ends, as long as there is SVLAN. If connection is without
any SVLAN and we inject SVLAN, then for some reason JunOS will report
VLAN-mismatch, even though it would not matter, as far end will swap it.

-- 
  ++ytti


More information about the juniper-nsp mailing list