[j-nsp] SRX Command

[Ben Dale]

After I spent a bit of time building an op script to print policy matches out in a nicely formatted table, I notice that this feature is now available for all policies even without the "then count" action from 12.1:

show security policies hit-count

Cheers,

Ben

On 24/09/2013, at 8:45 AM, Edward Dore <edward.dore at freethought-internet.co.uk> wrote:

> You'll need to add the "count" action to the "then" statement on each security policy if you want to track the number of times that the policy has been matched.
> 
> Edward Dore 
> Freethought Internet 
> 
> On 23 Sep 2013, at 23:08, Harri Makela wrote:
> 
>> Hi All
>> 
>> Is there any command in SRX which I can use to check "number of times FW policy has been used". Actually I want to clear all FW policies which are not being used for last 12 months or so.  I don`t know much about scripting but can try to get some help if I can think of a command which can be rung through different zones combinations.
>> 
>> 
>> Thanks in Advance !
>> HM
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>