[j-nsp] Network reachable in multiple routing-instance

[Ahmed -Y]

Hi Guys,

You can see topology on link below.
 http://s21.postimg.org/nz2wsuy1z/design.jpg

I have plenty of routing-instances (VRFs) on PE but lets say a subnet
10.1.1.0/24 is directly attached with PE via different interfaces in two
routing-instances (A, B). It is required to route traffic from global table
(inet.0) to A.inet.0 & B.inet.0 in order to reach to App Server. I
configure static route as mentioned below but when i bring down the
physcial link in one routing-instance, the static route point to that
routing-instance stary in routing table and traffic starts droping. Desired
result is when physical interface go down, static route should be inactive.



set routing-options static route 10.1.1.0/24 next-table A.inet.0

set routing-options static route 10.1.1.0/24 next-table B.inet.0

 Note: I have to stick to this physical topology and the existing
configuration.

Thanks

YH