[j-nsp] SRX PPPoE experience and scaling values.

[Giuliano Medalha]

I think that is not possible until now to use SRX as a BRAS element, only
MX family.

You could use MX5 with SM license for PPPoE users.

Giuliano Cardozo Medalha
Systems Engineer
+55 (17) 3011-3811
+55 (17) 8112-5394
JUNIPER J-PARTNER ELITE
giuliano at wztech.com.br
http://www.wztech.com.br/




WZTECH is registered trademark of WZTECH NETWORKS.
Copyright © 2013 WZTECH NETWORKS. All Rights Reserved.

The information transmitted in this email message and any attachments are
solely for the intended recipient and may contain confidential or
privileged information. If you are not the intended recipient, any review,
transmission,  dissemination or other use of this information is
prohibited. If you have received this communication in error, please notify
the sender immediately and delete the material from any computer, including
any copies.


On Wed, Apr 2, 2014 at 12:30 AM, Шепелев Андрей <xamalon4eg at gmail.com>wrote:

> Good day everyone.
>
> so far i was thinking about using SRX model as cheap PPPoE subscriber
> device, with radius authorization and accounting, so have anyone tried
> using it like this? any experience or options?
>
> thx.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>