[j-nsp] loop detection on EX4200

[Victor Sudakov]

Chris Evans wrote:
> 
> > Dave Bell wrote:
> > > You could try enabling bpdu-block-on-edge.
> > >
> > >
> > http://www.juniper.net/techpubs/en_US/junos12.2/topics/task/configuration/spanning-trees-bpdu-block-cli.html
> >
> > This is not an edge interface, I need RSTP running on it.

> RSTP should detect itself and put the interface into blocking mode..

For some reason it does not.

-- 
Victor Sudakov,  VAS4-RIPE, VAS47-RIPN
sip:sudakov at sibptus.tomsk.ru