[j-nsp] VC in OL state (Juniper - cisco l2xconnect)

[thiyagarajan b]

Thanks Werner,
Everything was configured and in place, but found memory alloc error in
cisco end. Same is rectified and vc works fine.

Warm Regards,
Thiyagarajan B.


On Wed, Aug 6, 2014 at 12:54 PM, Werner le Grange <wernerlegrange at gmail.com>
wrote:

> Hi
>
> On the J2320, check if your loopback interface is configured under
> protocols ldp.
>
>
> -Werner
>
>
> On Wed, Aug 6, 2014 at 7:06 AM, thiyagarajan b <bn.thiyagarajan at gmail.com>
> wrote:
>
>> Hi,
>>
>> I have made up a l2xconnect between cisco NPEG2 and juniper J2320 and
>> found
>> the vc is not coming up. When I find the state its in OL(no outgoing
>> label)
>> , I checked the LSP path is fine. What could be reason for this.
>>
>> Warm regards,
>> Thiyagarajan B.
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>
>