[j-nsp] MX5 and MIC 2x10G

[Simon Dixon]

If you need to do any per unit scheduling, then you will need the MIC, last
time I checked/tried it still didn't work on the onboard 10Gig NIC's on the
MX5-80's and I believe the MX104 onboard 10gig's are the same.

Simon.


On 6 August 2014 17:59, Blake Willis <jnsp at 2112.net> wrote:

> Hi Rob,
>
> You might also consider the recent MX104 "bundle" MX104-40G-AC-BNDL:
>
> "MX104 PROMOTIONAL BUNDLE, 40G, 2X10G BUILT-IN PORTS, 1 SERVICE MIC SLOT,
> 1 INTERFACE MIC SLOT, REDUNDANT AC PS. SW LICENCES INCLUDED:  JUNOS, ADV-R,
> JFLOW-5G"
>
> Cost should be about the same as an MX5 + 2x10GE MIC (possibly even a
> little
> cheaper), but you get a better RE, an open MIC slot, and more expansion
> capability down the road.
>
> Good luck.
>
>  -Blake
>
> ---
>  Blake Willis
>  Network Engineering Consultant
>  Scalable System Design LLC
>
>   "Education enabling individuals to overcome their reluctance or
> inability to
> take full advantage of technological advances and product innovation can
> be a
> means of increasing economic opportunity."
>
>    --Alan Greenspan
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>