[j-nsp] SRX IPv6 VRRP

[ashish verma]

There is an ER 057607 for this issue. Another option is to use IPv6 router
advertisements instead of VRRP.


On Tue, Aug 12, 2014 at 7:57 PM, Laurent CARON <lcaron at unix-scripts.info>
wrote:

> Hi,
>
> I'm currently deploying SRX110/210/240.
>
> After having configured the IPv4 part, i'm willing to configure IPv6 VRRP.
>
> It however seems the functionnality is severely broken in many points:
>
> [1] states:
> - VRRP for IPv6 will not work if the Branch SRX platform is processing
> IPv6 in flow mode.
> - If the SRX is processing IPv6 in packet mode...However, even in this
> state, the SRX will not be able to process any packets, which are forwarded
> to the VIP address.
>
> This is quite not useful.
>
> The 'solution' offered on [1] is to set the interface in promisc
> mode...which:
> 1/ is not really a good advice since all packets will hit the PFE
> 2/ is not possible if you are using aggregated (ae) interfaces
>
> How did you guys solve this issue ?
>
> Thanks
>
>
> [1]: http://kb.juniper.net/InfoCenter/index?page=content&
> id=KB23988&actp=search&viewlocale=en_US&searchid=1258894870731
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>