[j-nsp] Drawbacks when using QFX5100 and EX4300 in mixed VCF mode

[Sebastian Wiesinger]

* Sebastian Wiesinger <juniper-nsp at ml.karotte.org> [2014-08-19 17:51]:
> Hello,
> 
> Juniper supports mixing QFX5100 and EX4300 in a Virtual Chassis Fabric
> mixed mode but they talk about some vague performance and/or impact
> when doing so:

Aaand after I sent this, I get the link to a page listing the features
for mixed/non-mixed VCF:

http://www.juniper.net/techpubs/en_US/junos13.2/topics/reference/general/ex-qfx-series-software-features-overview-vcf.html

Still, if someone has practical input on VCF in general or caveats I'd
like to hear it.

Regards

Sebastian

-- 
GPG Key: 0x93A0B9CE (F4F6 B1A3 866B 26E9 450A  9D82 58A2 D94A 93A0 B9CE)
'Are you Death?' ... IT'S THE SCYTHE, ISN'T IT? PEOPLE ALWAYS NOTICE THE SCYTHE.
            -- Terry Pratchett, The Fifth Elephant