[j-nsp] Are there any conditions where a forwarding engine will reboot on a Branch SRX when enabling netflow?

[Mike Gonnason]

I have not had any issues enabling inline-jflow on my SRX100 deployments.
running code from 11.4R6.6 to 12.1x44-D35.5,

-Mike Gonnason


On Wed, Aug 20, 2014 at 9:47 AM, Scott Granados <scott at granados-llc.net>
wrote:

> Hi, the title just about sums it up but the details are this.  I have
> several different offices with various sized SRX firewalls.  I am enabling
> inline flow sampling on each per the Juniper KB article.  It doesn’t
> mention any possible reboots like you get when enabling inline sampling on
> an MX.  In the MX case the PFE reboots to reprogram the table size.  In the
> SRX there’s no table size set and appears no reboots but I want to confirm
> that before I start dropping configs during business hours.  Any pointers
> would be appreciated.  I don’t see anything while googling but wanted to
> make sure from the experts here.  Any comments would be most appreciated.
>
> Thank you
> Scott
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>