[j-nsp] flow sampling on redundant ethernet on Branch SRX?

[Mike Gonnason]

It seems like you can do it on Data Center SRX devices, but not branch.

http://forums.juniper.net/t5/SRX-Services-Gateway/RETH-interfaces-on-branch-SRX-clusters-and-jFlow/td-p/253211

I cannot find a workaround for this limitation, still seems to be present
in 12.1x46

http://www.juniper.net/techpubs/en_US/junos12.1x46/information-products/topic-collections/release-notes/12.1x46/junos-release-notes-12.1X46.pdf



On Wed, Aug 20, 2014 at 10:55 AM, Scott Granados <scott at granados-llc.net>
wrote:

> Hi, another SRX flow related question.
>
> Doing some googling it appears that you can’t sample flow data on RETH
> (redundant ethernet) interfaces.
>
> example
> set interfaces RETH0.30 family inet sampling input
>
> Is there a work around for this?  should I sample on the redundant member
> interfaces or is this just a no go entirely.
>
> What if any work around is there for this type of sampling?
>
> Thanks
> Scott
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>