[j-nsp] rpm / ip-monitoring

[Mattias Gyllenvarg]

Dear List

I have a rpm /ip-monitor setup that is supposed to test the function of a
local internet line (ping internet destination).

And disable it if it is not responding.

This works fine BUT, how do I get it to re-enable when it is working again.

I need this to work with DHCP so I cannot work with a default route.


**********************

services {
    rpm {
        probe Internet {
            test PING-GOOGLE-DNS {
                target address 8.8.8.8;
                probe-count 5;
                probe-interval 2;
                test-interval 20;
                thresholds {
                    total-loss 4;
                }
                destination-interface fe-0/0/3.0;
            }
        }
    }
    ip-monitoring {
        policy Local-Internet-Test {
            match {
                rpm-probe Internet;
            }
            then {
                interface fe-0/0/3 {
                    disable;
                }
            }
        }
    }
}

*************************

-- 
*Med Vänliga Hälsningar / Best Regards*
*Mattias Gyllenvarg*